日本又黄又大又粗视频,国产一级黄色AV片,黄色网站三极毛片,免费看日本黄色视频在线播放,黄色片jizz日本网站,国产毛片又长又大又粗又硬,欧洲免费又大又粗又色视频,国产干B,凹凸熟女白浆精品视频25 ,亚州大毛片视频

欢迎进入欣格瑞(山东)环境科技有限公司官方网站

国家级高新技术企业
山东省博士后工作站
可出口MVR 蒸發阻垢劑 SGR1101
可出口MVR 蒸發阻垢劑 SGR1101
可出口MVR 蒸發阻垢劑 SGR1101
可出口MVR 蒸發阻垢劑 SGR1101
可出口MVR 蒸發阻垢劑 SGR1101
可出口MVR 蒸發阻垢劑 SGR1101
可出口MVR 蒸發阻垢劑 SGR1101
可出口MVR 蒸發阻垢劑 SGR1101

可出口MVR 蒸發阻垢劑 SGR1101

发货地: 山东济宁

MVR蒸發阻垢劑是由有機膦酸鹽、膦羧酸、聚羧酸類阻垢分散劑、降粘劑、表面活性劑等組成。該產品能有效的抑制碳酸鹽、銹蝕產物、硫酸鹽或硅酸鹽等結垢。藥劑通過螯合增容、晶格修辭等作用,達到阻垢作用,分散劑還會與蒸發器表面所結污垢發生化學反應,使之不易在蒸發器表面沉淀附著,剝離老垢。保證了蒸發器表面清潔,提高熱傳導速度,延長設備使用壽命和清洗周期。

源头厂家,一桶也是批发价

出口

免费寄样
  • 12:21:13 c** 联系了可出口MVR 蒸發阻垢劑 SGR1101
  • 17:02:58 x** 联系了可出口MVR 蒸發阻垢劑 SGR1101价格
  • 14:26:26 t** 联系了可出口MVR 蒸發阻垢劑 SGR1101技术参数
  • 21:26:16 z** 联系了可出口MVR 蒸發阻垢劑 SGR1101添加量
  • 10:17:24 q** 联系了可出口MVR 蒸發阻垢劑 SGR1101生产资质
  • 16:38:23 y** 联系了可出口MVR 蒸發阻垢劑 SGR1101出厂价
  • 18:29:59 w** 联系了可出口MVR 蒸發阻垢劑 SGR1101电厂业绩
  • 15:02:03 l** 联系了可出口MVR 蒸發阻垢劑 SGR1101使用方法
  • 09:59:28 d** 联系了可出口MVR 蒸發阻垢劑 SGR1101化工厂应用案例
  • 12:35:56 k** 联系了可出口MVR 蒸發阻垢劑 SGR1101使用方法
  • 可出口MVR 蒸發阻垢劑 SGR1101超高性价比
  • 可出口MVR 蒸發阻垢劑 SGR1101三个工作日内发货
  • 可出口MVR 蒸發阻垢劑 SGR110124小时在线技术服务

同类产品推荐

一站式.jpg

品    名:MVR蒸發阻垢劑

型    號:SGR1101

1、產品介紹

MVR蒸發阻垢劑是由有機膦酸鹽、膦羧酸、聚羧酸類阻垢分散劑、降粘劑、表面活性劑等組成。該產品能有效的抑制碳酸鹽、銹蝕產物、硫酸鹽或硅酸鹽等結垢。藥劑通過螯合增容、晶格修辭等作用,達到阻垢作用,分散劑還會與蒸發器表面所結污垢發生化學反應,使之不易在蒸發器表面沉淀附著,剝離老垢。保證了蒸發器表面清潔,提高熱傳導速度,延長設備使用壽命和清洗周期。對抑制碳酸鹽、銹蝕產物、硫酸鹽或硅酸鹽的析出或沉淀有很好的效果。

zuanli.png

2、性能指標

圖片.png

3、使用方法

將MVR專用阻垢分散劑在加藥罐中稀釋后通過計量泵,按計量隨廢水一起加入蒸發器中,也可直接加入原液。一般用量為50~200ppm,根據水質情況確定具體用量。

4、包裝與貯運

(1)本品采用塑料桶包裝,25Kg/桶,1t/桶或根據客戶需要確定。

(2)本產品儲存在陰暗、通風的庫房,并遠離火種和高溫,庫溫不宜超過30℃。

(3)與易燃、可燃物、酸類、堿類等物質分開存放,切忌混儲。

(4)貯區應備有泄漏應急處理設備和合適的收容材料。

5、安全與防護

(1)避免吸入、食入,操作人員必須佩戴好防護眼鏡、防酸堿手套、防護口罩及工作帽,必要時要穿戴好防酸堿防護服。

(2)工作過程中不準進食、飲水,注意通風或局部排風,工作完畢用肥皂和清水洗手。

(3)裝卸時防止碰撞,注意密封,防止包裝及容器損壞。

  (4)裝卸過程中要禁止野蠻裝卸,確保容器不泄露、不倒塌、不墜落、不損壞,防止裝卸過程中溶液濺出傷人。

QQ圖片20210810111602.png


MVR evaporation of scale inhibitor

Product name: MVR evaporation scale inhibitor

Model number: SGR1101

Main components: composed of phosphine carboxylic acid, polycarboxylic acid polycopolymer, polycopolylate sulfonic acid copolymer, viscosity lowering, surfactant, etc.

physicochemical indexes:

project

metric

product appearance

Colorless or yellow-transparent liquid

PH (1% aqueous solution)

>7.0

Density (20℃)

≥1.1g/cm3

Effective material content of (%)

≥21.0

 Performance: MVR evaporation scale inhibitor has stable structure and low phosphorus content, which reduces the risk of forming calcium phosphate scale and reduces the pressure of environmental eutrophication pollution. Double ring or polyring chelates, which can form solid structure with metal ions such as calcium, magnesium and iron at high temperature and high pressure, have a good inhibition effect on the deposition of metal inorganic salts in water, and can also inhibit the corrosion of metals in the system. Many polymers have the effect of solubilization and lattice distortion, which can better inhibit the deposition of metal inorganic salts in water, and at the same time, they can disperse non-crystalline clay, dust, corrosion products and organic matter, so that they flow with the water and avoid dirt adsorption deposition. It can effectively keep the evaporator surface clean and scale-free, and then improve the heat transfer efficiency of the evaporator, accelerate the evaporation speed of the water in the waste liquid, prolong the cleaning cycle of the equipment, make the whole concentration process increase efficiency and save energy, reduce the cost, and significantly improve the benefit.

Usage: Dilute the MVR special scale inhibitor and dispersion agent in the dosing tank into the evaporator along with the wastewater through the metering pump, or the stock solution can also be added directly. The general dosage is 50~200ppm, and the specific dosage is determined according to the water quality.

 Packaging storage and transportation:

(1) This product is packaged in plastic bucket, 25 Kg / barrel, 1t / barrel or according to customer needs.

(2) The product is stored in a dark, ventilated warehouse, and far away from the fire and high temperature, and the storage temperature should not exceed 30℃.

(3) with flammable, combustible, acid, alkali and other substances stored separately, avoid mixed storage.

(4) The storage area shall be equipped with leakage emergency treatment equipment and suitable receiving materials.


可出口MVR 蒸發阻垢劑 SGR1101;为什么选择欣格瑞? 可出口MVR 蒸發阻垢劑 SGR1101;为什么选择 可出口MVR 蒸發阻垢劑 SGR1101;为什么选择 可出口MVR 蒸發阻垢劑 SGR1101;为什么选择

联系方式

联系人:张经理
联系电话:13792350985
电子邮箱:xingerui@139.com

在线留言

荣誉资质